GigaCore 26i
The GigaCore 26i is a Gigabit Ethernet switch providing a budget friendly solution when port density matters. The unit comes with all the advanced functionalities of the GigaCore Ethernet switches range, in a fully AV-installation oriented package. The unit offers 26 Gigabit ports that are all connected on the front panel. Each port on the switch will have coloured mode led indications which will indicate different properties of the port such as: PoE, redundancy and group membership.
Additional information
| Weight | 3,5 kg |
|---|---|
| Dimensions | 48,2 × 27,03 × 4,4 cm |
| Most suitable applications | Fixed installations |
| Ethernet connectivity | 24 x RJ45 connectors (incl. 4x dual media on ports 21-24) |
| Fiber connectivity | 6 x SFP cages (incl. 4x dual media on ports 21-24) |
| Power connectivity | 1 x IEC (14C) inlet, 1 x redundant power input on Molex Mini-Fit Junior 14 pin connector |
| Serial | 1 x serial RJ45 console port |
| RLinkX (Link redundancy) | Yes |
| Groups (VLAN segmentation) | Yes |
| MultiLinkX (Link aggregation) | Yes |
| PoE | Optional (up to 370W – up to 330W for Rev A) |
| Fan | 2 |
| Ethernet compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet |
| Supported protocols | Avnu AVB/MILAN, Dante©, RAVENNA/AES67©, Ethersound©, Q-SYS/Q-LAN, REAC©, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), IEEE 1588 PTP V2 |
| Sound protocol compliance | Yes (low jitter) |
| Memory | 4Mb |
| MAC address table | 8192 Entries |
| Address learning / Aging | Self learning, Auto aging |
| Switching throughput | 52Gbps |
| IGMP support | Yes (V1/V2/V3) |
| IGMP snooping | Yes, enabled by default |
| Port sensing | Auto negotiation |
| Auto crossover | MDI / MDIX |
| Auto sensing | Full or Half Duplex (Gigabit is Full Duplex) |
| Display and jog | None |
| Status LEDs | Global status LEDs: Device, power, PoE power, RLinkX and mode, Port status LEDs: PoE, MultiLinkX, RLinkX, groups, link/activity and port speed, Dark mode available |
| Colored RGB LEDs | Yes |
| Configuration | Through the built-in web server |
| Profile manager | Yes |
| Power input | 100-240VAC, 50-60Hz |
| Backup power input | 12VDC / 2,5A |
| Backup PoE power input | -54VDC / 6,5A |
| Power consumption | Maximum 30W |
| Fuse | None |
| Environment | Operating temperature: 0 to +50 °C (non-PoE version), 0 to +40 °C (PoE version), Storage temperature: -10 to +70 °C, Humidity (non condensing): 5 to 95% RH |
| Enclosure | Robust metal housing |
| Packaging | 545 x 420 x 80 mm (21,5" x 16,5" x 3,15") |
| Standards | IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55022, EN 55024 |
| URL | |
| Mounting | Rack |
| Product codes | LU 01 A0052 (GigaCore 26i Rev A), LU 01 A0052-POE (GigaCore 26i with PoE Rev A), LU 01 00052 (GigaCore 26i), LU 01 00052-POE (GigaCore 26i with PoE) |
| Dimensions (W X D X H) | 482 x 270,3 x 44 mm (19" x 10,6" x 1,73") |
| Weight | 4 kg |
| Ethernet port speed | 1Gbps |
| Position | 1 |
| Certificates/Approvals | cSGSus Mark, CE, CB certificate, RoHS |
| Noise level @1m | Max 22dBA (Ambient: 0 – 30°C), Max 33dBA (Ambient: 30 – 50°C), Max 22dBA (PoE <150W, Ambient: 0 – 30°C), Max 33dBA (PoE <150W, Ambient: 30 – 40°C), Max 33dBA (PoE >250W, Ambient: 0 – 30°C), Max 37dBA (PoE >250W, Ambient: 30 – 40°C) |
| Jumbo frames | MTU up to 9600 |
