GigaCore S30-I
Additional information
| Weight | 3,5 kg |
|---|---|
| Dimensions | 48,2 × 27,03 × 4,4 cm |
| Most suitable applications | System integrations, Installs |
| Ethernet connectivity | 24x Gigabit (10/100/1000 BASE-T) copper RJ45 on front panel |
| Fiber connectivity | 6x 1 Gbps SFP cages on front panel, independent from other ports |
| Power connectivity | 1x PowerCON True1 in |
| RLinkX (Link redundancy) | Yes |
| Groups (VLAN segmentation) | Yes |
| MultiLinkX (Link aggregation) | Yes |
| Fan | 3x |
| Ethernet compliance | IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3af PoE(optional), IEEE 802.3at PoE+(optional), IEEE 802.1ax, IEEE 802.1p CoS, IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree, IEEE 802.1Q VLAN, IEEE 802.1Qav MVRP, IEEE 802.1 BA-2011 AVB (Audio Video Bridging) IEEE 802.1ab LLDP, IEEE 1588-2008 PTPv2, IETF RFC2710, IETF RFC3810 |
| Supported protocols | Dante©, RAVENNA/AES67©, Ethersound©, Q-SYS/Q-LAN, sACN, ArtNet, MANet, HogNet, RTTrPL (BlackTraX), IPMX, NDI, IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), IEEE 1588 PTP V2, MILAN AVB, IEEE 802.1as (gPTP) and more… |
| Sound protocol compliance | Yes (low jitter) |
| Memory | 1 GB RAM – 8 MB NOR flash 4 GB EMMC storage |
| MAC address table | 16384 entries |
| Address learning / Aging | Self learning, Auto aging |
| Switching throughput 64 Byte | 44,4Mpps |
| Switching capacity | 60Gbps |
| IGMP support | Yes (V1/V2/V3) |
| IGMP snooping | Yes, enabled by default |
| Port sensing | Auto negotiation |
| Auto crossover | MDI / MDIX |
| Auto sensing | Full or Half Duplex (Gigabit is Full Duplex) |
| Display and jog | NA |
| Status LEDs | Global status LEDs: Device, power and mode, Port status LEDs: groups, link/activity and port speed, Dark mode available, Milan Mode |
| Colored RGB LEDs | Yes |
| Configuration | Network wide configuration through Araneo software and/or through the built-in web server |
| Profile manager | Yes |
| Power input | 100-240VAC, 50-60Hz |
| Backup power input | NA |
| Power consumption | S30-I PoE: max 333W, S30-I non PoE: max 30W |
| Fuse | NA |
| Environment | Operating temperature: 0 to +50 °C, Storage temperature: -40 to +70 °C, Humidity (non condensing): 5 to 95% RH |
| Enclosure | Robust metal housing |
| Packaging | 550 mm x 335mm x 68 mm |
| URL | |
| Mounting | Rack |
| Product codes | LU 01 00106-1G GigaCore S30-I-24R1-6S1, LU 01 00106-1G-PoE GigaCore S30-I-24R1-6S1-POE |
| Dimensions (W X D X H) | 482 x 249,6 x 44 mm (19" x 9,82" x 1,73") |
| Weight | Device only: 3,30 kg (Non PoE) 3.80 kg (PoE), Packaged: 3,65 kg (Non PoE) 4.3kg (PoE) |
| Position | 1 |
| Jumbo frames | MTU up to 120000 |
| Humidity (non condensing) | 5 to 95% RH |
| Storage temperature | -40 to +70°C |
| Operating temperature | 0 to +50°C |
| BTU | S30-I PoE: max 214.96 BTU/hr, S30-I non PoE: max 102.36 BTU/hr |
| NFC | No |
| TAA Compliance | Yes |
| Silent Fan Mode | Yes |
| Ingress Protection | N/A |
| Box Content | GigaCore with 2 long, recessable, rack ears attached, Quick Start Guide, No Power cable included |
