AV 業界向けにカスタマイズ

AV産業で共通の必要な設定QoS, IGMPスヌーピング等はすべて設定済みです。









複数のプロトコルの同時伝送 (Dante™, RAVENNA/AES67®, ArtNet, MANet 1&2, sACN,Q-LAN …)



RlinkX リダンダントプロトコルはリンクフェイルが発生した際に、自動的に通信経路を数十ミリ秒の速度で切り替えます。


PoE+ (オプション)

AC電源プラグの脱落も心配ありません。今では PoE+ により対応するデバイスにはイーサネットケーブルで信号とともに電源を供給できます。



オプション: リダンダントパワーサプライ(RPSU)

GigaCore 14R をGigaCore RPSU に接続して電源( PoEも含む)までも究極の冗長化。もし何かしらの原因で内臓パワーサプライが止まると、RPSU がシステムに電源を供給し続けます。

距離が問題の時は: ファイバーが解決

GigaCore 14R は、ファイバーが接続可能な SFP ケージを2つ搭載。マルチモードまたはシングルモードのファイバートランシーバーに接続するだけで、最大延長距離10kmが可能です。


The GigaCore 14R is a Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations. Managed through a web interface, the device offers a user friendly experience with an industry specific oriented interface. Fitted with two SFP cages, the switch can support any compliant fiber transceiver, breaking the limit of copper cable run. Two power backup ports at the rear of the unit makes the switch a reliable Gigabit core for your network. The GigaCore 14R comes with a bunch of industry oriented feature, providing a user friendly solution and lowering down setup time.

  • Most suitable applications: Touring and live events
  • RLinkX (Link redundancy): Yes
  • Groups (VLAN segmentation): Yes
  • MultiLinkX (Link aggregation): Yes
  • Profile manager: Yes
  • Memory: 4Mb
  • MAC address table:
  • Address learning / Aging: Self learning, Auto aging
  • Switching throughput: 32Gbps
  • IGMP support: Yes (V1/V2/V3)
  • IGMP snooping: Yes, enabled by default
  • Port sensing: Auto negotiation
  • Auto crossover: MDI / MDIX
  • Auto sensing: Full or Half Duplex (Gigabit is Full Duplex)
  • Ethernet connectivity: 12 x Shielded Neutrik Ethercon connectors
  • Fiber connectivity: 2 x SFP cages
  • Ethernet port speed: 1Gbps
  • Serial: 1 x serial RJ45 console port
  • Power connectivity:
    • 1 x IEC inlet with fuse holder
    • 1 x redundant power input on Molex Micro-Fit 6 pin connector
    • 1 x redundant PoE input on Molex Micro-Fit 6 pin connector
  • Power input: 100-240VAC, 50-60Hz
  • Power consumption: Maximum 30W (maximum 180W with PoE Supply Unit)
  • Fuse: 3.15A 250V Slow Blow
  • Backup power input: 15VDC / 2A
  • Backup PoE power input: 48VDC / 3.4A
  • PoE supply: Optional on front ports only (up to 160W)
  • Supported protocols: Avnu AVB/MILAN, Dante©, RAVENNA/AES67©, Ethersound©, Q-SYS/Q-LAN, REAC©, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), IEEE 1588 PTP V2
  • Sound protocol compliance: Yes (low jitter)
  • Ethernet compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
  • Display and jog: None
  • Configuration: Through the built-in web server
  • Status LEDs:
    • Global status LEDs: Device, power, PoE power, RLinkX
    • Port status LEDs: PoE, RLinkX, link/activity and port speed
  • Colored RGB LEDs: No
  • Mounting: Rack
  • Enclosure: Robust metal housing
  • Dimensions (W x D x H): 482 x 204,3 x 44 mm (19″ x 8.04″ x 1.73″)
  • Weight: 2,9 kg
  • Packaging: 545 x 335 x 80 mm (21,5" x 13,2" x 3,15")
  • Environment:
    • Operating temperature: 0 to +50 °C
    • Storage temperature: -10 to +70 °C
    • Humidity (non condensing): 5 to 95% RH
  • Noise level @1m:
    • Max 30dBA (PoE or Non PoE, Ambient: 0 – 35°C)
    • Max 42dBA (PoE or Non PoE, Ambient: 35 – 50°C)
  • Certificates/Approvals: CE, RoHS
  • Standards: EN 60950-1, EN 55022, EN 55024
  • Product codes:
    • LU 01 00038 (GigaCore 14R)
    • LU 01 00038-POE (GigaCore 14R with PoE supply)

*Note: Luminex LCE operates a policy of continuous development. Luminex LCE reserves the right to make changes and improvements to any of the products described in this document above without prior notice. Specifications are subject to change without notice.